Upload a file. Get a quote. Get a part.
Every step from upload to delivery, and what we stand behind.
- Quote
- Instant
- Order min
- $40
- ABQ delivery
- Free
- Tolerance
- ±0.5 mm or ±0.2%
STL or 3MF. Drag in or browse. No account or email before you see the price.
Geometry, material, and quantity priced in seconds. Settings adjustable per part. Card on file, paid at submission.
Every file reviewed before slicing. Dialed materials, parts measured before they go in the box.
Free hand-delivery across the 30-ZIP ABQ metro. $10 flat anywhere else in the US. The part comes from us, not a broker.
Quote, pay, queue. No sales call between.
Drop in an STL or 3MF, pick a material from the catalog, set a quantity. The engine prices the part on the spot: weight, setup, expedite tier, delivery. Adjust layer height, infill, walls, or perimeters per part if you want control over the print. Otherwise we use the settings we'd run for that material and geometry. Card on file, paid at submission. Nothing else appears at checkout.
The whole line item, on one page.
Every quote breaks down the same way: material priced by gram at the catalog rate, $5 per distinct file in setup, expedite multiplier (if any), and delivery. The $40 order minimum applies to the subtotal. That's the entire fee table. There isn't a second one.
- PETG · Bracket · 47 g$9.40Material × weight
- Setup · 1 file$5.00$5 per distinct STL or 3MF
- Standard productionIncludedExpedited +50% · Rush +100%
- Delivery · ABQ metroFree$10 flat outside ABQ
Every file gets a second look before we slice.
A 1.2 mm wall in PETG, an overhang past 50°, a support trap in an enclosed pocket, a part oriented so the load runs across the layer line — slicers don't catch these, and you find out when the part shows up wrong. We catch them at review, before we cut layers. If we see something worth a conversation, we pause the job and reach out. Refund, revise, or run as-is. The print goes on the bed once we're aligned.
Part sliced with 45 degree rotation to ensure layers align with all load paths.
Z-seam tucked into the back corner so the witness line stays off the sealing face.
Print speed is tuned carefully to prevent heat buildup and accurately resolve the fine spike feature.
PET-CF chosen for creep resistance. Five perimiters for rigidity, gryroid infill for isotropy.
Same part, same profile, same result.
When you reorder a part, the orientation, settings, and material come from the first run, not from slicer defaults. We keep the profile on file. That matters for short-run production, drop-in replacement parts, and gap manufacturing while you wait on injection-mold tooling. Volume discounts apply on identical units in a single order: 10% at 5, 20% at 25, 30% at 100.
Your geometry stays on our equipment.
Files stay on our equipment, attached to your order. Not on a public cloud bucket, not routed to a supplier network, not held longer than reorders need. If your work needs an NDA before you upload, reach out through the contact page first. We'll send one over and confirm receipt before the file moves.
If a part misses spec
Parts that miss spec don't ship.
Every part comes off the bed, gets inspected, and gets measured to ±0.5 mm or ±0.2%, whichever is greater. Out-of-spec parts get a re-print or refund, your call. The package you open is one we'd send to ourselves.
Have a file ready?
Get a quote →